Riester ri-medic Instructions D'utilisation page 8

Buttons on the main BP module
Button Functionality for the BP Module
Button Device Status
Idle
Automatic
Taking an
automatic or
Manual mode
BP
In Calibration
Check mode
Idle
Taking a
Manual mode
BP
Manual
Taking an
automatic BP
In Calibration
Check mode
Power off
Power
Power on
Automatic + Power off
Power
Manual + Power off
Power
08
Action
Push for less than 2
seconds
Push for 2 to 5 seconds
Push for more than 5
seconds
Push
Push
Push
Push
Push
Push
Push
Push
Hold the Automatic
button down while
pushing the Power
button.
Hold the Manual mode
button down while
pushing the Power
button.
Result
Start an automatic BP
measurement.
Redisplay last measurement values
for all modules.
Clear last measurement values for
all modules.
Aborts the BP measurement in
progress.
Device exits Calibration Check mode
and is ready to take measurements.
Inflates the cuff as long as the
button is selected.
Re-inflates the cuff as long as the
button is selected.
Aborts the BP measurement in
progress.
Device exits Calibration Check mode
and is ready to take measurements.
Turns on the device.
Turns off the device.
Device enters the Calibration Check
mode.
Device enables/disables MAP mode.