Operation; Main Power Switch; Setting The Cooktop - Bosch HIIP054 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation

Main power switch

Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key until the indicator above the
main switch and the temperature level indicators
the heating elements turn on.
Turning the cooktop off
Touch the On/Off touch key. The indicator above the
On/Off key goes out. The cooktop is switched off. The
residual heat indicators will remain on until the elements
have cooled off sufficiently.
Note: The cooktop switches off automatically when all the
elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the elements
have cooled down sufficiently.
corresponding element symbol.

Setting the cooktop

This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the touch keys
+ and -.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat level has an intermediate level. This level is
displayed as a dot.
Selecting the heat level
The cooktop must be turned on.
1. Select the desired element by touching the
on the control panel. In the display next to the element
symbol
lights up.
2. Within the following 10 seconds, touch the + or - key.
The default settings appear.
+ key = power level 9
- key = power level 4
English 11
next to
œ
/
is displayed next to the
$
symbol

3. To change the power level, touch the + or - key until
the desired power level is displayed.
Note: The selected power level will flash if no pan is
placed on the induction element. After a certain time, the
element turns itself off.
Turning off the element
Touch the + or - key until
and the residual heat indicator is displayed.
Notes
If there is no cookware on the induction cooking zone,
the heat setting display blinks. After a while, the
cooking zone will switch itself off.
If cookware has been placed on the cooking zone
before you turn on the cooktop, it will be detected
within 20 seconds after you have touched the main
switch and the cooking zone will be selected
automatically. Once detected, set the power level
within the next 20 seconds, otherwise the cooking zone
will turn off.
Even if there are several pots and pans on the cooktop
when it is switched on, only one piece of cookware is
detected.
Settings table
The following table provides some examples. Cooking
times may vary depending on the type of food, its weight
and quality. Deviations are therefore possible.
Note: During cooking, stews or liquid meals such as soups,
sauces or drinks can heat up too quickly unnoticed and
overflow or spatter. For this reason we recommend that you
stir continuously, gradually heating the food at a suitable
power level.
Melting
chocolate
butter
Heating
frozen vegetables (e.g. spinach)
broth

appears. The element turns off
Power levels
1.
1 - 2
2. - 3.
7 - 8

Publicité

Chapitres

Table des Matières
loading

Table des Matières