Loading Paper - Sony UP-D890 Mode D'emploi

Loading Paper

Loading
28
Preparation
Notes
• Do not fold the paper or touch the printing surface. Dust on the printing surface
will result in poor print quality.
• After loading the paper roll, pull out and cut off the first 15 to 20 cm (6 to 7
inches) to remove any slack.
• Use only UPP-110 series paper (p. 34).
• Set the DIP switches according to the paper type (p. 26).
1
Press the power ON/OFF switch to turn on the printer.
The POWER lamp lights.
2
Press the OPEN/CLOSE button to open the paper lid.
3
Place the paper roll in the paper tray.
Place the paper with the
thermo-sensitive side
(printing side) up.
7
⁄
8