Settings - Stiebel Eltron FET Utilisation Et Installation

OPERATION
Menu
5.1.3 COMFORT
In this menu, you can permanently change the comfort tem-
perature for the room.
COMFORT
KOMFORT
20°
f Touch "MENu" or "OK" to switch to the COMFORT menu.
f
The display shows the currently set value.
f Keep your finger on the Touch-Wheel. A circle appears f
showing the currently set value.
20°
f Swipe your finger around the Touch-Wheel to adjust the f
comfort temperature.
f Take your finger off the Touch-Wheel. The display shows
f
the selected setting for a few seconds before switching
automatically to the relevant menu. The entry is saved.
Note
The value set in the heat pump manager for the com-
fort temperature has been changed for the assigned
heating circuit.
Application
To permanently increase or reduce the temperature for the
room.
5.1.4 DHW
In this menu, you can heat the water in the dHW cylinder to
the comfort temperature set in the heat pump manager on a
single occasion or for 1 to 3 days (see SETTINgS / dHW / dHW
TEMPERATuRES / COMFORT TEMPERATuRE).
FET
. 5
. 5
DHW
WARMWASSER
35°
f Touch "MENu" or "OK" to switch to the dHW menu. The f
display shows the currently set value.
f Keep your finger on the Touch-Wheel. A circle appears f
showing the currently set value.
1
f Swipe your finger around the Touch-Wheel to adjust the
f
heating of the dHW cylinder. The dHW cylinder can be
heated to the comfort temperature on a single occasion
or for 1 to 3 days.
f Take your finger off the Touch-Wheel. The display shows f
the selected setting for a few seconds before switching
automatically to the relevant menu. The entry is saved.
Note
Once the selected value has expired, dHW heating is
operated according to the times set in the heat pump
manager (see PROgRAMS / dHW in the heat pump
manager).
Application
For higher dHW demand (e.g. guests).

5.2 SETTINGS

In this menu, you can read the information and make certain
settings. Navigation here is similar to navigation in the heat
pump manager.
SETTINGS
EINSTELLUNGEN
| 17