Fronius Acctiva Easy 1202 Instructions De Service page 32

7
8
9
If there is no start process after 30 seconds, the charger switches automatically to the
alternator test. If the start process is not possible, charge or check the battery.
Testing the alter- While the engine is running, the charger checks the voltage the alternator is supplying to
nator (Acctiva the battery.
Easy chargers
1
only)
2
Alternator voltage
OK.
3
32
Start engine
Charger checks the voltage behaviour of the battery during the start process
Charger displays battery startability for 15 seconds
very good starting
response
Alternator test running. Let engine run for approx. 30 seconds at 1500-2000 rpm
Charger displays alternator test result.
Alternator voltage
OK. Possible pro-
blems on short jour-
neys or in winter.
To finish the test, disconnect from battery or connect charger to mains supply to
begin charging.
poor starting response
Alternator voltage
Alternator voltage
too high. Have
too low. Have alter-
alternator checked
nator checked in
in workshop.
workshop.