Alarm Options; Bluetooth Operation - Tivoli Audio MUSIC SYSTEM THREE Mode D'emploi

7. Lastly, use the pq buttons to set the volume level of the alarm, then press Select.
8. Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote and
begin again.
Power Loss: Should power be lost, or the Music System Three becomes discon-
nected, the alarm time will be saved but the Music System Three alarm cannot
sound if there is no power.

Alarm Options

When the alarm sounds you can activate the Snooze feature or shut the alarm off.
Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the
remote, or briefly press the Multi-Function Control Wheel on top of the unit. The Snooze
time is not adjustable. Pressing the Snooze button again while still in Snooze mode will
re-set the Snooze timer back to 10 minutes.
Alarm off: To stop the alarm while it is sounding, press the Alarm button on the unit or
remote, or press and hold the Multi-Function Control Wheel on top of the unit. You can
also press the Power button on the remote.
Alarm Quick Set: With the Music System Three in Standby, repeatedly press the alarm
button on the remote briefly to toggle each alarm on or off.
IMPORTANT NOTES:
• The alarm cannot sound if the Music System Three is off and not connected to the
external adapter.
• Should power be lost or the battery becomes discharged, the alarm time will be
saved, but the alarm cannot sound without power to the Music System Three.

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is
not connected to any other Bluetooth product. Devices may pair differently. Below is a
general guide.
1. Press the Music System Three's front panel Bluetooth button or change the source to
Bluetooth. This will power on the Bluetooth. Turn the volume up about ¼ to start. Also
turn up the volume on the source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initi-
ate searching. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli
Bluetooth" will change from "Not Paired" to "Connected".
4. You will hear a ring tone from the Music System Three confirming connection and you
can begin playing your music files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again. Depending on your device, you may
need to make multiple attempts at Pairing and/or Connecting to the Music System
Three, but please give your device adequate time to Pair or Connect before repeat-
ing the process.
13 – ENGLISH