How To Set Alarm - Tivoli Audio MUSIC SYSTEM THREE Mode D'emploi

H. Clock Set: Press the Select button and use the pq arrow and Select buttons
to set/change the hour, then press Select. Repeat this process to set/change the
minutes, then press Select.
I. Volume Limit (NOT IN AM OR FM MENUS): If you wish to reduce the maxi-
mum volume level so as not to disturb others, press the Select button and use
the pq arrow and Select buttons to choose between Volume limit 26 or 22.
Selecting "Off" keeps the maximum volume at the factory default setting of 30.
Note: Reducing the overall volume level will also reduce the level of the alarm's
volume when the alarm sounds.
J. Alarm 2 (NOT IN AM OR FM MENUS): If you do not expect to use Alarm 2 or are
afraid Alarm 2 may be set in error, press the Select button and use the pq arrow
and Select buttons to Disable Alarm 2.
K. Bluetooth Level (NOT IN AM OR FM MENUS): Use the pq and Select buttons to
select "Low" should you wish to reduce the range of the Bluetooth signal. This may
be desirable if the Bluetooth feature will only be used when you are in very close
proximity to the radio. We recommend this setting remain in the "Normal" position.
3. TIVOLI EQ
A. Bass: Press Select and use the pq arrow and Select buttons to adjust the bass.
B. Loudness: The equalizer acts as a Loudness control at low volume levels. Use
the pq buttons to select between having the Loudness on, having the Loudness
always off, or the Loudness off until the Music System Three is turned off (when it
is turned on again the Loudness will be on again).
C. Balance: As the balance control has no effect when the Music System Three is set
to Mono, this setting should remain in the center position. Though we still recom-
mend the center balance setting in Stereo mode, you may use the pq buttons to
adjust the balance to your liking, and press the Select button.
D. Treble: Press Select and use the up/down arrow and Select buttons to adjust the
treble and press the Select button.
How to Change Alarm Settings and Set the Alarm Via
the Main Menu
1. With the Music System Three powered on, access the alarm settings by pressing the
Alarm button on the remote.
2. Alarm 1 is shown first. Use the pq and Select buttons to choose between Alarm 1
and Alarm 2.
3. Use the pq and Select buttons to set the alarm on or off.
4. Use the pq buttons to set/change the hour, then press Select. Repeat this process to
set/change the minutes, followed by AM/PM (if time is set to 12 hour format), then press
Select. Note: At any point you can navigate through the alarm menu by using the back
or left arrow buttons, and the Select or right arrow buttons.
5. Use the pq buttons to set how often the alarm should be set to wake, then press Select.
6. Use the pq buttons to select the source you wish to wake to, then press Select. If
you set the source to AM or FM, use the pq buttons to select the station preset (if
presets have been stored) or last listened, then press Select.
12 – ENGLISH