Princess Smart Aerofryer Mode D'emploi page 6

Instruction manual
• Press the round control knob to turn on the Aerofryer. Select the
desired function by touching the icon touch button, the select function
is blinking. Press the start/stop round control knob to start.
• When you select the function, the Aerofryer will start the
corresponding program. When you have chosen the wrong program,
you can cancel by pressing the start/stop round control knob. After this
you can select another function. It is also possible to adjust the chosen
program by changing the time and temperature.
• It is also possible to start the device without selecting a function. Set
the time and temperature with the timer and temperature knob, select
time or temperature pushing the time or temperature touch button on
display, then adjust by turning the start/stop round control knob. Press
the start/stop round control knob to start.
• The temperature can be set between 80 and 200 degrees, the time
can be set between 1 and 60 minutes.
• When you pull out the pan during the frying process, the device will
shut off automatically within 5 seconds. When you reinsert the device,
the program will resume.
• Excess oil from the ingredients is collected on the bottom of the pan.
• Some ingredients require shaking halfway through the preparation
time. To shake the ingredients, pull the pan out of the appliance by the
handle and shake it. Then slide the pan back into the air fryer.
• When you hear the timer beep 5 times, the set preparation time has
elapsed. The device will shut off after 20 seconds. Pull the pan out of
the appliance and place it on a heat resistant surface.
• Check if the ingredients are ready. If the ingredients are not ready yet,
simply slide the pan back into the appliance and set the timer to a few
extra minutes.
6
• Empty the basket into a bowl or onto a plate. When a batch of
ingredients is ready, the air fryer is instantly ready for preparing
another batch.
• The device can be switched off by pressing the round start/stop control
knob, it takes approximately 20 seconds to turn the device off.
USING THE SMART AEROFRYER WITH THE HOMEWIZARD KITCHEN
APP
• The fryer can be used manually with its built-in controls or you can use
a smart phone to control it. Before you begin, ensure the Homewizard
kitchen app is downloaded. The Homewizard kitchen app is available
on Android and iOS.
Pair your Smart Aerofryer to HomeWizard kitchen app
1. Unpack the device and remove the stickers and packaging materials.
2. Put the plug into the wall socket.
3. Install the "HomeWizard Kitchen" App on your smartphone.
4. Press on the round control knob to turn on the Aerofryer.
5. Long-press the "temperature" button for 5 seconds then the WIFI icon
will appear on the display.
6. Follow the instruction in the app to connect your Aerofryer.
Tips
• Shaking smaller ingredients halfway during the preparation time
optimizes the end result and can help prevent unevenly fried
ingredients.
• Add some oil to fresh potatoes for a crispy result. Fry your ingredients
in the air fryer within a few minutes after you've added the oil.