Battery Type; Operation Description - HITEC RDX2 Pro Notice D'utilisation

Getting Started
Available Operations (continued)

Battery Type

NiMH
NiCd
Lead
Acid
Pb
Operation
The charger will charge NiMH and NiCd batteries using
CHARGE
the charge current set by the user.
In this program, the charger detects the condition of the
connected battery and automatically charges the battery.
Note: You should set the upper limit of the charge current
AUTO CHG
to avoid damage by excessive charging current. The RDX2
Pro may not be able to detect the charge capacity of low
resistance batteries.
DISCHARGE This mode is for discharging a NiMH/NiCd battery
In re-peak charge mode, the charger can peak charge the
battery once, twice, or three times in a row automatically.
RE-PEAK
This is good for confirming the battery is fully charged and
for checking how well the battery receives fast charges.
Automatically charges/discharges the battery up to 5
CYCLE times. This process can restore the performance of NiMH/
NiCd batteries.
CHARGE This mode is for charging a Pb battery.
This mode is for charging an Absorbent Glass Mat (AGM)
AGM CHARGE
battery.
This mode is for charging a Pb battery at low
COLD CHARGE
temperatures(<-32
DISCHARGE This mode is for discharging a Pb battery.

Operation Description

F/0 C).
o o
13