Troubleshooting - Amibot PURE LASER Manuel D'utilisation

Troubleshooting

"Please scrub the
front sensor, and
05
restart me from a
new location"
"Please scrub
the right-hand
06 sensor, and restart
me from a new
location"
"Please scrub the
radar housing on
07 top, and restart
me from a new
location"
"Bumper may be
08 stucked, please
check"
"Please clean the
09
dustbin and filters"
"I'm stuck, please
10 help me!" / "Please
place me correctly!"
"Please check if
my wheels have
11
become blocked
somewhere"
The bumper's sensors
are dirty.
The wall sensor is dirty.
The laser module is
dirty.
Problem with the
bumper. The bumper
is frozen.
The dustbin is full or
the filters are dirty.
The robot has got
stuck.
Problem with the
wheels and/or the
castor.
29
Clean the bumper's sensors
using a soft cloth.
Clean the wall sensor using
a soft cloth and place the
robot somewhere else.
Check the laser and clean
it thoroughly. Be sure to
remove any dust that could
prevent it from working,
using a soft cloth.
Check the bumper and
place the robot somewhere
else.
Empty the dustbin and
clean the filters (see the
Maintenance section).
Move the robot to a clear,
flat area.
Check the wheels and
the castor and remove
any elements likely to be
blocking them.
EN EN