Amibot PURE LASER Manuel D'utilisation page 35

Troubleshooting
The appliance
05 is hard to
manoeuvre.
Scheduling
06 does not work
correctly.
1. The wheels are
jammed.
2. The gap and obstacle
sensors are dirty.
3. Problem with the
laser module.
1. The robot is not
switched on.
2. The robot battery is
weak.
3. The dustbin is full.
4. Scheduling has been
cancelled.
33
1. Clean the vacuum
wheels and remove the
hair and other debris
caught up around
them.
2. Gently clean all of
the sensors on the
appliance.
3. Clean the laser module
gently with a soft cloth.
1. Switch the robot on.
2. Recharge the robot
before starting a new
cleaning cycle.
3. Remove the dustbin
and empty it before
reinserting it.
4. Check the schedule on
the mobile app and
reschedule the cleaning
cycle, if necessary.
EN