Amibot PURE LASER Manuel D'utilisation page 21

Operating the robot
SPOT mode
AREA TO CLEAN mode
HOME mode
the distance between the home base and if there are any obstacles
along its route).
This mode is the most effective when
cleaning a particularly dirty area. With
SPOT mode, the robot concentrates on a
1.5 m x 1.5 m area. At the same time, it
activates its MAX vacuum power to vacuum
the dust from the floor more easily.
The robot's AREA TO CLEAN mode is
available to clean a particular area. With
this mode, the robot cleans an area of
1.8 m x 1.8 m. To use this mode, you need
to place the robot in the area you want to
clean and press the Home base button on
the robot for 3 seconds or the AREA TO
CLEAN button on the remote control.
If you need to charge the robot at any time
while in use, you can do so by pressing
the Home base button. The robot will
automatically go back to its home base
once it has completed its cleaning cycle
(the time it needs to search depends on
19
EN