Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Remove infant insert.
!
Vehicle waist belt must pass underneath
infant insert.
- 1
2. Pass the vehicle waist belt
8
through the
vehicle waist belt slots and then engage the
vehicle buckle tongue into the buckle.
9
- 2
3. Install the vehicle shoulder belt
8
in the
two rear-facing vehicle shoulder belt slots at the
back of the seat shell.
10
!
Vehicle shoulder belt must pass through the
rear-facing vehicle shoulder belt slots.
!
The locking clip is used only when the child
restraint is used in the rearward facing mode.
!
The locking clip will make the child restraint
safer.
!
Please replace the locking clip and string in
the bag when they are not in use.
11
8
2
1
9
10
4. Take the locking clip out of the bag.
11
5. While pressing the child restraint down firmly
- 1
into the vehicle seat
12
﹐ pull the vehicle
shoulder belt to fasten the child restraint tightly
-
2.
and securely
12
!
The child restraint cannot be used if the
vehicle safety belt buckle (female buckle end)
is too long to anchor the child restraint
- 3
securely.
12
6. Press button to open the locking clip.
13
11
12
3
13
13
12
Publicité
Table des Matières
