Height Adjustment - Joie stages Manuel D'instructions

.
The recline positions are shown in 5
There are three recline positions (1-3) for
forward-facing Toddler mode and two recline
positions (1-2) for forward-facing Youth mode 5 .
The recline position 4 is for rearward-facing Infant
.
mode 5
Angle indication: with top and bottom triangles
.
aligned 5

Height Adjustment

Height Adjustment
(for Head Support and Shoulder Harness Straps) (for Head Support and Shoulder Harness Straps)
see images -
6 7
Please adjust the head support and shoulder harness straps to the proper height according to the child's
height.
!
When used in rearward-facing Infant mode﹐ the shoulder harness slots must be even with or just below the
- 1
6
child's shoulders.
!
When used in forward-facing Toddler mode﹐ the shoulder harness slots must be even with or just above the
- 2
child's shoulders. 6
!
When used in forward-facing Youth mode﹐ the shoulder belt guides must be even with or just above the
- 3
child's shoulders. 6
If the shoulder harness straps are not at proper height﹐ the child may be ejected from the child restraint during
a crash.
6
9
5
Squeeze the head support adjustment handle
- 1
7 and pull up or push down the head support
until it snaps into one of the five positions.
7
The head support positions are shown in .
Infant Mode
(for Child under 18kg / Newborn - 4 year old)
see images -
8 22
Reference age Newborn -4 year old
Seat position Position 4 (with top triangle and blue triangle aligned﹐ as shown in
!
Please install the child restraint on the vehicle seat first﹐ and then place the child in the child restraint.
i. Installation for Rearward-Facing Infant Mode
see images -
8 16
Note
1. First adjust the child restraint to recline Position 4. Angle indication: With top triangle and blue triangle
5
aligned . Please refer to image 4 (Reclining Adjustment).
2. Make sure the shoulder harness straps are adjusted to the proper height before installing this child
restraint. Please refer to images 6-7 (Height Adjustment for Head Support and Shoulder Harness Straps).
3. When installing and adjusting the vehicle belts, make sure that both the vehicle shoulder belt and the
vehicle waist belt are not twisted or the belts may not function properly.
7
1
5 ).
10