Height Adjustment; Recline Adjustment - Joie spin 360 Manuel D'utilisateur

Removing the base
To remove from the vehicle press
the ISOFIX adjuster button
10
pull the base back from the seat.
-2
10
Then press and release the
connectors from the vehicle's
ISOFIX.
11
To prevent damage during transit,
press the ISOFIX adjuster button
-1 and fold the connector
12
completely. -2
12

Recline Adjustment

see images -
13 14
Squeeze the recline adjustment
button 13 , to adjust the child
restraint to the proper position. The
recline angles are shown as
11
10
2
-1 and
11
2
12
2
13
14
Please recheck the load leg position
after reclining.
There are 5 recline positions for rear
facing mode and 5 recline positions
for forward facing mode.
1

Height Adjustment

for Head Support and Shoulder Harnesses
1
see images
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
!
When used rear facing, the
shoulder harness height must be
1
even with child's shoulders.
!
When used forward facing, the
shoulder harness height must be
even with child's shoulders.
14
-
15 17
15
15
15
15
12