What To Do If; Technical Data; Installation - ZANKER KOB10301XB Notice D'utilisation

Clean the glass panel with water and soap. Dry the
glass panel carefully.
Installing the door and the glass panel
When you install the panel with a decorative frame,
make sure that the screen-printing zone looks to the in-
ner side of the door. Make sure that after the installa-
tion the surface of the glass panel frame on the screen-
printing zones is not rough when you touch it.
Make sure that you install the internal panel of glass in
the seats correctly (refer to the illustration).

What to do if...

Warning! Refer to the Safety chapters.
Problem
The appliance does not heat up.
The appliance does not heat up.
The oven lamp does not operate.
Steam and condensation settle on
the food and in the appliance.
If you cannot find a solution to the problem yourself,
contact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Voltage
Frequency

Installation

Warning! Refer to the Safety chapters.
Possible cause
The appliance is deactivated.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the appliance for
too long.
The necessary data for the service centre is on the rat-
ing plate. The rating plate is on the front frame of the
appliance cavity.
230 V
50 Hz
Remedy
Activate the appliance. Refer to
"Daily use".
Do a check of the fuse. If the fuse is
released more than one time, con-
tact a qualified electrician.
Replace the oven lamp.
Do not let the dishes stay in the ap-
pliance for more than 15-20 mi-
nutes after the cooking ends.
.........................................
.........................................
.........................................
23