Mesto FERROX PLUS 3565P Mode D'emploi page 13

Masquer les pouces Voir aussi pour FERROX PLUS 3565P:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
EN
Welcome and congratulations
on purchasing your new quality product. Thank you for the trust you have shown in our brand.
Your satisfaction with our product and services is very important to us.
Please contact us if your expectations are not met.
You will find our address on the title page of these instructions for use.
Make certain to read the instructions for use before using the device!
Keep the instructions for use in a safe place where they can be easily found.
The instructions for use are an integral part of the device and must be enclosed
when the device is passed on. Particular safety measures are required when
working with the device.
Usage
Spraying devices FERROX PLUS 3565P, 3580P and INOX PLUS 3595P, 3615P are desig-
ned for the spraying of forming oils and low-viscosity mineral oils, slightly alkaline construc-
tion chemicals (pH ≤ 9). INOX PLUS 3595P, 3615P can also be used for solvent-free and
chloride-free, neutral cleaning agents as well as low-viscosity, solvent-free emulsion paints
and paints.
Improper use may result in dangerous injuries and environmental damage.
Follow the safety notices and data sheets of the substance manufacturers before each
application. Observe the specified maximum concentrations for chemical substances and
preparations. We will be happy to advise you on what best suits your needs.
Observe the legal and statutory regulations applicable in your country.
The device may be used outdoors or in well ventilated rooms only. Have the salesperson
or an expert show you how to operate the device if you are working with it for the first time.
Not suitable for
• Combustible liquids
• Hydrogen peroxide and similar substances that give off oxygen
• Corrosive substances (certain disinfecting and impregnating agents, acids and bases)
• Liquids containing ammonia
• liquids at temperatures above 50 °C
• Wetting agents (surfactants), solvents, and liquids containing solvents which can cause
or promote cracking in the applied plastics.
• Viscous or sticky liquids or liquids that form residues (dyes, greases)
• Use in applications for foodstuffs.
Under no circumstances should you use
• external sources of pressure without original compressed air filling valve
• for flaming
• for storing and holding liquids
• as an eyewash.
13
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ferrox plus 3585pInox plus 3595pInox plus 3615p

Table des Matières