Use; Maintenance - Agilent Technologies Turbo-V 1001 Rack Mode D'emploi

16 Instructions for Use

Use

Use

This paragraph describes the fundamental operating procedures.
Detailed information and operating procedures that involve optional
connections or options are supplied in the paragraph "USE" of the
appendix "Technical Information".
Make all vacuum manifold and electrical connections and refer to
Turbo-V pump instruction manual prior to operating the Turbo-V
controller.
WARNING! To avoid injury to personnel and damage to the equipment, if the pump is
lying on a table make sure it is steady. Never operate the Turbo-V pump if
the pump inlet is not connected to the system or blanked off.

Maintenance

The Turbo-V 1001 Rack Controller does not require any maintenance.
Any work performed on the system must be carried out by
authorized personnel.
200/288 Turbo-V 1001 Rack Controller User Manual / 87-901-033-01