Samsung NX58H9950W Série Manuel Utilisateur page 64

Problem
Oven will not self-clean.
Crackling or popping
sound.
Excessive smoking during
a self-cleaning cycle.
Oven door will not open
after a self-cleaning cycle.
Possible cause
The oven door lock is turned on.
The warming drawer is being
used.
The oven is too hot.
The self-cleaning oven controls
are not properly set.
The door is opened.
This is normal.
This is the first time the oven has
been cleaned.
This is normal.
English - 64
Action
The display will show the Lock
icon. Hold the oven door open
and press the START/SET button
for 3 seconds. The oven will beep
and the Lock icon will turn off.
Self-clean will not operate when
the warming drawer is on.
Let the oven cool down and reset
the controls. The self-clean cycle
will not lock the oven door if the
oven temperature is too hot. The
door must lock before the self-
clean cycle can start.
Reset the self-cleaning oven
controls. (See page 56.)
Make sure that the door is closed.
This is the sound of the metal
heating and cooling during any
cooking or cleaning function.
This is normal. The oven will
always smoke more the first time
it is cleaned.
Wipe up all excessive soiling
before starting the self-cleaning
cycle.
If smoke persists, press the
OFF/CLEAR button. Open the
windows to clear the smoke from
the room. After the oven has
cooled and unlocked, wipe up
excessive soil and reset the oven
for self-cleaning.
The oven door will stay locked
until the oven temperature drops
below 392 °F.