Elmo TT-02 RX Mode D'emploi page 8

English
Attention
Whenever moving the product, turn off the power switch on the product
and then unplug the power plug and AC adapter. Move after checking
that the external connection cord is disconnected. Otherwise, the cord
could be damaged and result in a fire or electric shock.
For safety reasons, if this product is not used for a long time, be sure to
unplug the power plug and the AC adapter.
Otherwise, it could result in a fire.
Do not disconnect the power plug or AC adapter by pulling the cord.
Otherwise, the cord could be damaged and result in a fire or electric
shock.
Disconnect by pulling the power plug or AC adapter.
If the product is placed on a stand with casters, make sure the caster's
brakes are on. It could result in an injury if it moves and falls.
Do not place the product in a damp or dusty location.
This could result in a fire or electric shock.
Do not place the product in a location where it could be exposed to
smoke, steam, or water droplets such as on a kitchen counter or near a
humidifier. This could result in a fire or electric shock.
Do not sit on, or place any heavy objects on, this > on this product. Be
extra careful if there are any small children in the area when using the
product. It could result in an injury if it breaks.
Do not place the power plug or AC adapter cables next to a heater.
The cord covering could melt and result in a fire or electric shock.
Do not connect or disconnect the power plug or AC adapter with wet
hands.
Failure to do so could result in an electric shock.
Make sure the power plug is securely inserted into the socket.
If it is not inserted correctly, it could generate excess heat and dust
could enter which could result in a fire.
Also, touching a prong of the power plug could result in electric shock.
If the power plug is loose in the electrical outlet, even when it is fully
inserted, excess heat could be generated and result in a fire. Contact a
licensed electrician to replace the faulty outlet.