The Remote Control - Elmo TT-02 RX Mode D'emploi

Symptom
Images on the SD
c a r d a r e n o t d i s -
played
The image does not
move.

The remote control

does not work.
After inserting the SD
card, operations can-
not be performed.
About the lamp (LED lighting)
The brightness of the lamp will degrade with long-term usage. If its brightness has been degraded
greatly, consult the seller from whom you have purchased this product or our branch/office near your
location for replacement.
About long-term usage of this product
If this product is used for longer than the warranty period, its performance and quality may deteriorate
due to the lifetime of its parts. In this case, we will replace the parts for a charge. Consult the dealer
from whom you purchased this product or our nearest branch/office.
Possible cause/counter measure
• Remove the SD card and then reinsert it after a few seconds.
• Camera image is set to [Pause]. Press the Pause button on the oper-
ating panel again to unpause.
• Battery performance is reduced. Replace the batteries with new
ones.
• The incorrect remote control is being used. Use the supplied remote
control.
• The SD card is not being read correctly.
Use the SD card after formatting it twice as described below.
First, format the card using a computer. Second, format the card us-
ing the main unit.
English