Table des Matières
Publicité
CAUTION
!
Caution:
this symbol indicates precautions that must be taken to avoid damaging the appliance.
• Do not make any modifications of any kind on
your Caldofà.
• Don't leave your Caldofà exposed to the weather
(rain, sun, etc.).
• Do not cover or obstruct the unit's air intake and
outlet grilles.
• Do not rest tools or material on your Caldofà or
its electrical cord.
• Always turn your Caldofà on when lighting up
your fireplace. This will prevent any damage from
occurring to the motor-ventilator unit due to
overheating.
• To store the motor-ventilator unit and leave the
heat exchanger in the stack, it is advisable to
insert the caps with the symbol of a faun,
supplied with the unit, into the holes of the pipes
group.
• Whenever you no longer need to use your
Caldofà and want to remove it from the fireplace
for storage, first turn it off and then remove the
plug from the wall socket. Then, after having
made sure it is properly cleaned and oiled (see
the Maintenance / Cleaning section), store it in a
cool, dry place out of reach of children and
*or an authorized Vortice dealer if you are outside the UK-Ireland territory
!
In order to avoid getting the electrical
components wet and to avoid rusting, never
use water or any other liquid to put out the
fire or coals.
infirm persons.
• Periodically inspect the appliance for damage.
If any faults are found, do not operate the appliance;
contact Vortice* immediately.
• In the event that the appliance malfunctions or
develops a fault, contact Vortice* immediately.
Ensure that only genuine original Vortice spares are
used for repairs.
• In the event that the appliance is dropped or suffers a
heavy blow, have it checked immediately by Vortice*.
• Turn off your Caldofà when you are not using it.
• Before plugging in your Caldofà to an electrical outlet,
check to see that the mains voltage is compatible with
the voltage specified on you unit's data plate. If it is
not, contact a qualified technician.
• Check to see that the mains to which your Caldofà is
to be connected conform to the existing "Safety
requirements for electric systems"
• If the electrical cord is damaged, have an authorised
Vortice Service Centre replace it for you as soon as
possible.
• Furthermore...
Specifications for the power supply must
correspond to the electrical data on data plate
ENGLISH
1
.
1
15
Publicité
Table des Matières
