Shelf Storage; Disposal - MITSUI Heraeus Kulzer Translux Wave Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
CAUTION
Do not use pointed or sharp objects to clean the charging unit contacts!
Do not spray or flood the contacts with liquids!
Do not bend or modify the shape of the charging unit contacts during cleaning.
Make sure that the charge contacts remain dry after cleaning and are not contacted by metallic and greasy
parts. If necessary, dry the contacts by blowing air onto them with compressed air.
8.6.2
CHARGING UNIT – Replaceable charging contacts
Working instructions:
Required tool:
1.
2.
3.
4.
5.
6.
7.
CAUTION
Do not bend or contaminate the new contact bridge!
Do care about perfect insert and fixation! Do not over tight the screws!
9

Shelf storage

10

Disposal

NOTE – IMPORTANT
The device must not be disposed o in normal domestic waste.
For the disposal of spare parts, or the unit, please contact the Heraeus Kulzer subsidiary directly in your
country.
Dispose unserviceable batteries and light guides according to the corresponding legal requirements in your
country.
WARNING – Damaged or exhausted battery disposal
Dispose a damaged or exhausted battery after taking the necessary steps to prevent external short circuit
by the following method:
After having insulated the terminals of the battery with tape dispose o in accordance with your local council.
Disposal of old equipment according to WEEE (European Directive) or
Electrical and Electronic Equipment Act (German Law ElektroG).
point 12
GB
- 19 -
2x

Publicité

Table des Matières
loading

Produits Connexes pour MITSUI Heraeus Kulzer Translux Wave

Table des Matières