Connection Of The Charging Unit To The Mains Power Outlet; Inserting The Battery Into The Hand Piece - MITSUI Heraeus Kulzer Translux Wave Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
Never short circuit the end elements of the battery with any metal object as it could cause a risk of burns,
fire and explosion.
The device is transportable but it must be handled with care. Transport the device in a horizontal position.
Do not let the device be exposed to shaking or vibrations. For sizes and weight see paragraph 12 (Technical
specifications).
WARNING – RISK OF EXPLOSION
Do not install the device where there is the risk of explosions. The device must not be used where an
inflammable atmosphere is present (anaesthetic mixtures, oxygen, nitrous oxide, etc.). Install the device
in a well ventilated area.
5.2

Connection of the charging unit to the mains power outlet

WARNING
Before connecting the charging unit ( 6 ) to the mains network, check carefully that the voltage and frequency
of the mains network correspond to the values stated on the rating plate of the device. The rating plate is
fitted to the bottom of the charging unit.
Use only the switching power supply adapter which is provided with the device. The use of any other power
supply adapter can result in damage of the battery.
Do not connect the switching power supply adapter to the mains socket by using a multiple portable socket-
outlet.
NOTE
The Translux Wave power supply unit (6) is supplied with
three interchangeable adapters:
Fig. (6 a)
Fig. (6 b)
Fig. (6 c)
1
2
3
4
NOTE
Pressing down on the adapter during installation ensures that all the slides are held by the retainers on the
power supply unit. If the adapter feels loose, remove it and re-install.
5
6
7
WARNING
Check the power cable, the power supply unit and the adapter regularly to make sure that they are in good
condition. If damage is apparent do not use damaged part until it is replaced. Use original Heraeus Kulzer
spare parts and accessories only.
8
9
5.3

Inserting the battery into the hand piece

WARNING
Carefully follow all the safety precautions described in the paragraph 3.2.3 (BATTERY – Safety precautions).
6
1x
GB
- 11 -
PUSH

Publicité

Table des Matières
loading

Produits Connexes pour MITSUI Heraeus Kulzer Translux Wave

Table des Matières