Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
• Connect the power cord to the appliance inlet at
the back of the appliance first, then connect pow-
er plug to a suitable electrical power outlet.
• Digital temperature controller (at the back of the
appliance) operation
1) Setting the temperature
- Press SET to enter into the setting mode. The
set temperature is displayed.
- Press
or
to increase or decrease the set
temperature.
- Press SET again to confirm the setting and exit.
Then, inside cabinet temperature is displayed.
Note:
- If no button is pressed within 10 seconds. The
newly set temperature will be stored.
- The temperature setting range from 2°C to 7°C.
And the cabinet temperature range can be kept
from 0°C to 12°C.
- Keep the door open time as short as possible in
order to keep a cool temperature inside.
• Leaving the appliance for running some hours to
reach the cooling temperature before placing the
beverage or food inside the appliance.
C
SET
2) Illumination inside the cabinet
- Press
to switch ON the light. Press
to switch OFF the light.
3) Refrigerant LED indicator
- During the cooling operation (compressor en-
abled), this refrigerant LED indicator will lights
up constantly.
- After the inside cabinet reach the set tempera-
ture, the refrigerant LED indicator will flashes
continuously.
- When defrost start, the refrigerant LED indi-
cator light off.
4) Defrost LED indicator
- During the defrost operation, this defrost LED
indicator will lights up constantly.
- After the defrost operation, defrost LED indica-
tor will lights off.
again
EN
7
Publicité
Table des Matières
