Arktic 233757 Mode D'emploi page 6

Different operation parts
1. Open the front
glass here.
EN
3. Open the front glass for
60° degree to fix it, then
you can do cleaning
or change advertising
paper.
Preparation before using for the first time
• Remove all protective packaging and wrapping.
• Check for the completeness of the product. In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty).
• Clean all components as described (See ==>
Cleaning and Maintenance).
• Place all the racks inside the appliance.
6
Glass door
Digital controller
Stainless steel tray
(not included)
2. Open the front glass for
30° degree to pull it up.
4. Pay attention: For the sake of
safety, don't pull the front glass
with tension over 30N
• This appliance can have capacity of up to 5x1/3
GN. (Stainless steel containers not supplied).
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.