ALPHA-TOOLS ABM 500E Mode D'emploi page 7

Anleitung ABM 500 E AlphaTools
Scope of delivery package
ABM 500 E,
Quick-change drill chuck 2 -13 mm,
Additional grip with bit stop
Description
1 Quick-change drill chuck
2 Depth stop
3 Additional handle
4 Selector button: drill/hammer
5 Selector button:
clockwise/anticlockwise
6 Speed control
7 Locking button
8 On/Off switch
04.12.2003 8:34 Uhr
GB
Technical data
Voltage: 230 V ~ 50 Hz
Power rating: 500 W
Drilling capacity Concrete 13 mm
Steel 10 mm
Wood 20 mm
No Load Speed 0 - 3000 min
Safety insulated II /
Sound pressure
level LPA 89,2 dB(A)
Sound power
level LWA 102,2 dB(A)
Vibration a w 22,5 m/s
Weight 1,9 kg
Caution
The ABM 500 E is not
designed for the operating of
auxiliary devices.
Do not use near steams or
inflammable liquids.
Only use sharp bits and suita-
ble screwing bits.
Remove the plug from the
socket for all adjusting and
cleaning work.
Protect the mains cable against
any damage. Oil and acids can
damage the cable.
Do not carry the device by the
mains cable.
Do not remove the plug from
Seite 7
-1
2
7