Technical Data - ETNA A2132HRVS Mode D'emploi

tEcHNIcAl DAtA

Installation
EN 26
Electrical connection
For this appliance a mains supply of 230V, 50 Hz AC is needed.
The appliance has a mains lead with an earthed plug.
Please note! For safe use it is necessary that the appliance is
correctly earthed. Never connect the appliance to DC. Incorrect
use can cause electric shocks.
Please note for the A2132HRVS: first fit the support in the
cupboard (see drawing). This support prevents the microwave from
tilting forwards.
Please note: the microwave needs to be screwed on the front in
the cupboard.
Slide the microwave into the cupboard. Open the door of the
microwave. There is a round opening at the front middle for
Auto
inserting a screw. Screw the microwave and cover the screw with
the cap.
• Never cover the ventilation opening.
• Do not place the microwave in the vicinity of heat sources.
• Send and receive equipment such as radios and TVs can
influence the working of the microwave.
375 mm
Auto