Non-Combustible Facing Material - Napoleon STARfire Série Manuel D'installation Et D'opération

framing
EN
4.4

non-combustible facing material

WARNING: The appliance opening may be recessed in non-combustible facing material provided it does not
project more than 2" (50.8mm) past the face of the appliance. If greater projections are desired, increase the
clearance to the sides, bottom and top by 2" (50.8mm) for every additional 1" (25.4mm) of projection. If using
an optional surround, then 2" (50.8mm) clearance from the surround is required before projecting out a
maximum 2" (50.8mm). If greater projections are desired, increase the clearance from the surround by 2"
(50.8mm) for every 1" (25.4mm) of additional projection.
A
A
6" (152.4mm)
4" (101.6mm)
2" (50.8mm)
0" (0mm)
BARRIER
30
W415-2363 / A / 11.01.19
4"
(101.6mm)
3" (76.2mm)
2" (50.8mm)
TOP OF
APPLIANCE
SAFETY
DOOR
SECTION A - A
B
B
6" (152.4mm)
4" (101.6mm)
2" (50.8mm)
0" (0mm)
SECTION B - B
4" (101.6mm)
3" (76.2mm)
2" (50.8mm)
1" (25.4mm)
TOP OF
APPLIANCE
DOOR