Lenze L−force 9400 Série Instructions De Montage page 47

(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
)
Note!
Switching operations on the motor side of the controller are
permitted for safety switch−off (emergency off).
Please observe:
ƒ
ƒ
EDK94ZPS113 DE/EN/FR/ES/IT 6.0
Destruction of the device if the mains voltage is too high.
Observe the maximally permissible mains voltage.
Fuse the device correctly on the supply side against mains
fluctuations and voltage peaks.
When the controller is enabled, switching operations may lead to
a response of the controller monitoring functions.
The switching elements on the motor side must be rated for DC
voltages with U
DCmax
l
Electrical installation
Important notes
= 800 V.
5
47