Original Operating Manual - Festool PL 205 E Notice D'utilisation D'origine

Original operating manual

1 Technical data
Carpentry planer
Voltage
Frequency
Rated input
Power output
Speed: no-load
rated load
Planing depth
Planing width
Weight of the electric tool
Safety Class
2 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Read the operating instructions/notes!
Wear protective goggles.
Wear a dust mask!
Wear ear protection!
Wear protective gloves!
Do not throw in the household waste!

Advice or tip
3 Operating controls & Description
1. Main handle of the planer
2. Mains switch
3. Lock-off button
4. Overload indicator (LED diode)
5. Front handle, swiveling (for planing depth ad-
justment)
6. Planing depth scale
7. Locking lever of planing depth adjustment
8. Front shoe, adjustable
9. Fixed shoe
10. Pivoted guide roller
11. Air inlet openings
PL 205 E
220 - 240 V ~
50/60 Hz
2 000 W
1 380 W
13 500 rpm
9 000 rpm
0 – 3 mm
205 mm
13 kg
II /
12. Chip discharge opening
13. Machine housing cover
14. "V" groove for chamfering
15. Cutting head with blades
16. Reversible blade
17. Blade backing plate
18. Blade clamping rail
19. Hole for insertion of the locking pin for blade
replacement, preventing rotation of the
cutting head
20. Blade fi xing screws
21. Open-ended wrench (No. 8/13)
22. Cutting head guard
23. Driving belt guard
24. Carbon brush cap
25. Hexagon-head screw of the machine housing
cover
The accessories shown or described in this Op-
erating Manual may not be included as a part of
delivery.
4 Intended use
The carpentry planer is universally applicable for
planing and smoothing of visible surfaces on raft-
ers, e.g. projecting rafters, rafter ends and purlins;
it may be also utilized for planing struc- tural tim-
ber and lattice work, as well as for other carpentry
works or woodworking in general.
The user is solely liable for damage and acci- dents
caused by improper use of the product.
For safe work with this electric tool and preven-
tion of injury, it is imperative to follow all gene-
rally accepted safety principles and regulations for
prevention of accidents, and read the en- closed
"Safety instructions" thoroughly.
The manufacturer disclaims liability for dam-
ages caused by unauthorized modifi ca-
tions or using other than the supplied or
specified accessories with the electric
tool.
8
PL 245 E
220 - 204 V ~
50/60 Hz
2 300 W
1 500 W
13 000 rpm
10 500 rpm
0 – 3 mm
245 mm
14 kg
II /
GB