Marmitek Invisible Control 6 XTRA Guide Utilisateur page 6

4.2 LOCATING THE IR BLASTER LED
4.2.1 Inside the (TV) cabinet
Stick the Blaster LEDs (2) that are connected to the 'IR OUT'
output wherever you like inside the (TV) cabinet, enabling you to
operate all A/V equipment inside the same compartment.
x
With a correct placement one blaster LED can control all A/V
devices placed in the same compartment.
x
In some situations it is necessary to place a second blaster
LED if not all A/V devices can be controlled with one blaster
LED.
x
Or you place the blaster LED on one of the A/V devices in
the middle of the (TV) cabinet and the other equipment will
be controlled as well by the reflection of the infrared signal.
6 © MARMITEK