General Description; Extent Of The Delivery; Description Of Function; Overview - Deltafox DP-CAG 2015 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 61
GB
When used with the closed protective
cover, the angle grinder is a tool for cut-
ting metal, concrete or tiles without using
water.
The device is not intended for any other
types of applications (e.g. grinding with
unsuitable grinding tools, grinding with a
coolant solution, grinding or cutting ha-
zardous materials such as asbestos).
When used with the open protective co-
ver supplied, only dry grinding and roug-
hing are possible.
The device is intended to be used by
do-it-yourselfers. It was not designed for
heavy commercial use.
The tool is to be used by adults. Children
under the age of 16 may not use the tool
except under supervision.
The manufacturer is not liable for dama-
ges caused by an improper use or incor-
rect operation of this device.

General description

The illustration how to handle the appli-
ance can be found on pages 2+3.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
-
Cordless Angle Grinder
-
Battery-charger
-
Battery
-
Additional handle
-
Protective hood
-
Chuck key
-
Storage case
-
Instruction Manual charger and battery
-
Instruction Manual
26

Description of function

The angle grinder is made for cutting or
roughing metal. Special wheels and pro-
tective covers are available for each of
the separate applications.
the information from the disc manufac-
turer.
Please refer to the descriptions below for
information about the operating devices.

Overview

1 Additional handle
2 Spindle stop button
3 Threads for additional handgrip
4 On/off switch
5 Handgrip
6
Battery release button
7
Battery
8
Activation button battery Indicator
9
Battery Indicator
10 Tightening lever for protective
hood
11 Grinding wheel (not included in
delivery)
12 Protective hood for dry grinding
13 Storage case
14 Charger
15 Charge level indicator
16 Adjustment nut
17 Mounting spindle
18 Mounting flange
19 Clamping nut
20 Chuck key
Please refer to

Publicité

Table des Matières
loading

Table des Matières