Additional Safety Instructions; Residual Risks - Deltafox DP-CAG 2015 Mode D'emploi

GB
get caught and the attachment tool
could drill into your body.
• Clean the ventilation slots of your
electric tool routinely. The motor air
pulls dust into the housing and, should
too much metallic dust collect, could
cause electrical hazards.
• Never use the electric tool near
flammable material. Sparks could ig-
nite this material.
• Do not use attachment tools which
require liquid coolant. Using water
or another liquid coolant could lead to
electrical shock.

Additional safety instructions

• Only use grinding discs where the
indicated rotational speed is at least
as high as what has been specified on
the name plate of the device.
• Carry out a visual inspection of the
grinding disc before use. Do not use
any damaged or deformed grinding
discs. Replace any damaged or worn
grinding discs.
• Make sure that the sparks produced
by grinding do not present a danger,
e.g. reach people or ignite flammable
substances.
• Always wear safety goggles, safety
gloves, respiratory protection and ear
protection when grinding, brushing
and cutting.
• Never keep the fingers between the
grinding disc and spark protection or
in close proximity to the protective
hoods. There is a risk of crushing.
• The rotating parts of the device cannot
be covered due to functional reasons.
Therefore, proceed cautiously and
hold the workpiece firmly in order to
avoid slipping which could cause your
hands to come into contact with the
grinding disc.
32
• The workpiece gets hot during grind-
ing. Do not touch the machined area,
allow it to cool down. There is a risk
of burning. Do not use coolants or the
like.
• If you are tired or have consumed al-
cohol or tablets, do not work with the
device. Always have a break on time.
• Turn off the appliance and, before do-
ing any servicing, remove the battery.

RESIDUAL RISKS

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
d) Health injuries which result from
swinging hand and arm, in the event
that the device is used over a longer
period of time or is not used and main-
tained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.