General Description; Extent Of The Delivery; Description Of Function; Overview - Deltafox DP-EAG 7525 Traduction De La Notice D'utilisation Originale

GB
The device is intended to be used by
do-it-yourselfers. It was not designed for
heavy commercial use. The tool is to be
used by adults. Children over the age of
16 may not use the tool except under su-
pervision.
The manufacturer is not liable for damag-
es caused by an improper use or incorrect
operation of this device.

General description

The illustration how to handle
the appliance can be found on
pages 2 and 3.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Device
- Handgrip
- Protective hood
- Chuck key
- Carbon brushes
- Instructions for use

Description of function

The angle grinder is made for cutting,
scrubbing or brushing metal. There is a
special disc for each of the separate ap-
plications. Please refer to the information
from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.

Overview

1 Spindle stop button
2 Threads for handgrip
3 Speed regulator
4 On/Off switch with switch lock
(4a)
24
4b Release
5 Protective hood
6 Handle
7 Cutting disc (not included in de-
livery)
8 Mains plug
9 Spare carbon brushes
10 Chuck key
12 Mounting flange
13 Clamping flange
14 Uptake spindle
11 Clamping lever
11a Adjustment nut

Technical data

Angle grinder ................... DP-EAG 7525
Rated input voltage..... 220-240 V~, 50 Hz
Power input .................................... 750 W
Idling speed (n) ....................... 11000 min
Dimensions of the cutting/
roughing discs .............Ø 125 x 22,23 mm
Thickness of the cutting/
roughing discs .........................max. 6 mm
Grinding spindle thread .................... .M14
Thread length
of the grinding spindle ...........max. 12 mm
Safety class ........................................
Protection category............................IPX0
Sound pressure level
(L ) ...................85,98 dB(A); K
pA
Sound power level (L
measured ......... 96,98 dB(A); K
Vibration (a ) ......... 9,554 m/s
h
The vibration values represent maximum
values which have been determined with
the supplied blade. The actual vibration
values may vary depending on the used
accessories.
The vibration values are still affected by
the handling for the user's.
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1,5m/s
2
-1
II
2