Troubleshooting; Error Correction - Deltafox DP-CAG 2015 Mode D'emploi

Troubleshooting

Turn off the appliance and, before doing any servicing, remove the battery.
Problems
Device doesn't
start
Grinding tools do
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smooth-
ly, abnormal noises
can be heard
Possible Cause
Battery ( 7) discharged
Battery ( 7) not inserted
On/off switch (
defective
Engine faulty
Grinding disc nut (
loose
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Device is overloaded through
workpiece
Grinding disc nut (
loose
Grinding disc is defective

Error correction

Recharge battery (see „Charg-
ing")
Insert battery (see „Operation")
4) may be
Repair by Customer Care
Tighten grinding disc nut
19) is
( 19) (see „Changing the
grinding disc")
Remove blockages
Reduce pressure on grinding
tool
Workpiece unsuitable
Tighten grinding disc nut
19 is
( 19) (see „Changing the
grinding disc")
Change grinding disc
GB
41