General Safety Directions For Power Tools - Deltafox DP-CAG 2015 Mode D'emploi

GB
Read the manual!
Wear ear protection
Wear eye protection
Wear breathing protection
Risk of cuts!
Wear cut-resistant gloves
Electrical machines do not belong
with domestic waste
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Warning symbols with informa-
tion on the prevention of per-
sonal injury caused by electric
shock.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.
General Safety Directions for
Power Tools
WARNING! READ ALL SAFETy DI-
RECTIONS AND INSTRUCTIONS.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire and/
or severe injuries.
28
Retain all safety directions and instruc-
tions for future use.
The term „power tool" in the warnings re-
fers to your mains-operated (corded) power
tool or battery-operated (cordless) power
tool).
1) Work area safety :
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable Iiquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2) Electrical safety :
CAUTION! The following states how
to avoid accidents and injuries due
to electric shock:
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or ground-
ed.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-