Publicité
ScopiX IV Bus – Self-contained portable digital oscilloscope with two isolated 300 MHz channels : GUIDE TO STARTED the four-step test of integrity of the field bus
CN
第 1 步 :
选定需要分析的总线
显示列表中所有可用的总线文件（按文件滚动），选中的文件
显示为白色，同时在"当前设置"中显示相关需要注意的标准。
启动分析前选中其中一个文件。
根据标准的技术性特征，显示未获得总线的诊断所必不可少的 Probix
波段的连接。
第 2 步 :
显示最小和最大允许公差的标准公差。
可用通过修改数量值来修改标准参数（通过数字键盘修改），然后将该
参数保存在默认文件名的文件夹中，按"X"键确认，带有星标的文件
将被储存在"bus-limits（总线-限制）"目录中。
通过电脑软件 SX-BUS 创建具体的总线文件夹。
第 3 步 :
根据所选定的标准与参数分步骤启动诊断：
显示每个计算结果
第 4 步 :
分析结果
这些结果可以保存在内存或SD卡中扩展名为".HTM"的文件
夹中。
在默认情况下，诊断帮助以图标形式显示，红色表示故障，橙色表示处
于标准的临界值，绿色表示符合标准。
X04798A00_Ed.01_04/2018
条
兆赫隔离通道便携式独立数字示波器
ScopiX IV Bus - 2
300
步骤现场总线完整性测试启动说明
- 4
GB
Step 1 :
Choosing the bus to be analysed
Display of all available bus files in a list (file-by-file scrolling),
The selected file appears in white, with a reminder of the associated
standard in the "current configuration" part.
Select one of these files before starting the analysis.
Indication of connection of the Probix probes, essential to obtaining a
bus diagnostic according to the technical characteristics of the
standard.
Step 2 :
Display of the tolerances of the standard,
parameter-by-parameter, with the min and max tolerances
Modification of the parameters of the standard by pressing on the
property (change to numerical keypad), then saving of the parameters
to a default file name, confirmation by pressing "X"; the file,
accompanied by a star, is stored in the "bus-limits" directory
Creation of a specific bus file using SX-BUS PC software.
Step 3 :
Start of the diagnostic, in stages, according the
standard selected and its parameters: display of each
calculation
Step 4 :
Result of the analysis
These results can be saved to a file having the ".HTM"
extension, in internal memory or on the SD Card.
Diagnostic help appears, with red pictograms, if there is a fault; orange
if borderline according to the standard; and green if compliant with the
standard.
Publicité
