Storch 65 77 00 Mode D'emploi page 29

6.4 Castors on the cleaning hood do not move
6.5 Water squirts through the sealing brushes
6.6 Stopping valve at the pistol grip of the cleaning
hood does not move.
6.7 Suction unit switches off
Attention:
This machine features an automatic switch-off function, which causes the machine to stop in case of block-ups in the
suction parts (hood, hose, drum connection pieces). In this case the red signal lamp at the switch is on.
Set the main switch to "0", remove the block-up and switch on again after a waiting period of approx. 5 min.
7. Technical Data:
7.1 The delivery of the STORCH High-Pressure "Octopus"
Art. no 65 77 00 includes:
1 Standard cleaning hood complete with sealing brushes.
1 High-pressure hose 10 m.
1 Suction hose 10 m.
1 Outlet hose 10 m.
1 Suction unit complete with filter, submerged pump and
undercarriage.
7.2 Suction unit:
A.C. 230 V, 50 Hz
Current consumption 9.2 A
Power consumption 2000 W
Motor speed 23 000 r.p.m.
Air conveying capacity 320 m2/min
Suction hose 10 m - 38 mm diameter
Total height 1 150 mm, total width 530 mm,
Filtering content 30 l, weight 38 kg.
Noise level 68 db (A).
Power line 8 m
Remove dirt possibly occuring between roller bearing and
castor.
Clean and/or replace conglutinated sealing brushes.
Is the suction performance too low? (see point 6.2 and 6.3).
Are the brushes adjusted incorrectly? (see point 3.2).
Does the Dirt miller not rotate? (see point 6.1).
Check locking condition.
Water temperature too high.
Pressure too low due to kinked suction hose or dirty folded
filter (see picture, point 17.
Filling level too high due to blocked filter bag or non-
functioning submerged pump.
7.3 Submerged pump:
A.C. 230 V, 50 Hz
Current consumption 1.8 A
Power consumption 320 W
Motor speed 2 800 r.p.m.
Conveying height 1 / 3 / 5 / 7 m
Volume 11 / 9 / 6 / 1 m2/h
Dirty water outlet R 1".
Dirty water temperature max. 80°C
7.4 Standard cleaning hood art. no. 65 75 50:
Total width 150 mm, total length 340 mm,
Operating width approx. 110 mm.
Operating pressure 60 - 200 bars
Water supply max. 20 l/min
Water temperature max. 80 °C
7.5 High-pressure hose art. no. 65 65 14:
Length 10 m, operating pressure max. 400 bars,
temperature resistant up to 150°C.
connection to the high-pressure cleaner
2 9 2 9
2 9 2 9 2 9