Electrical Connection - Pelgrim PSK970MAT Mode D'emploi

5 Installation
5.2 Electric connection
The appliance has been manufactured as a class II, therefore no earth cable is
necessary.
Make sure the supply voltage ratings correspond with those stated on the appliance data
plate. The connection to the mains is carried out as follows:
•
BROWN = phase L
•
BLUE = phase N
•
Green/yellow = earth
This canopy hood has been provided with a
power plug. When installing the hood, make
sure that this plug remains accessible. We
recommend installing the wall socket out of
view, behind the chimney cover.
Attention:
If you want to make a fi xed connection,
ensure that a multi-pole switch with a
distance between contacts of 3 mm is
installed in the supply cable.
44