Electrical Connection - Pelgrim MSK630 Mode D'emploi

INSTALLATION
Connection
Electric connection
The appliance has been manufactured as a class I. The cable must
be connected to an earthed socket!
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = phase L
BLUE = phase N
YELLOW/GREEN = earth
This canopy hood has been provided with a power plug. When installing
the hood, make sure that this plug remains accessible. We recommend
installing the wall socket out of view, behind the chimney cover.
Attention!
If you are making a fixed connection, you must ensure that a double
pole switch with an air gap of at least 3 mm is fitted in the supply line.
max 150 cm
GB 11