Serial Numbers - Peg-Perego PRIMO VIAGGIO SL Notice D'emploi

Replacing the soft cover
• To reposition the car seat cover:
17• slide the soft cover on in sequence, as shown in the
figure:
- slide the cover on from the top
- first carefully insert the sides of the headrest
- then slide the soft cover over the bottom of the
headrest.
• To slide on the headrest cover, start from the two sides
and then slide on the bottom (Fig. a);
• Insert the crotch strap through the opening in the soft
cover (Fig. b) and slip it through the crotch strap cover
(Fig. c).
18• Reposition the booster cushion (Fig. a) and fasten the
hood's elastic bands behind the handlebar (Fig. b).
Insert the shoulder straps into the backrest, as shown
(Fig. c).
Insert the shoulder pads (Fig.d).
Engage the harness (point 3a).
IMPORTANT: The straps must not be twisted.
The Original Accessory Peg-Perego
Peg-Perego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product's accessories on
www.pegperego.com

Serial numbers

19• A label on the front lateral side, under the fabric,
contains the following information: product name,
production date and serial number (Fig. a).
• The type approval label can be found on the rear of the
backrest, at the top (Fig. b).
• Harness production date (Fig. c).
In the event of problems with the product, these
details will be of use to customers.
Product cleaning
• This product requires minimal maintenance. Cleaning
and maintenance must only be carried out by adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth.
Do not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
How to read the type approval label
This paragraph explains how to interpret the type
approval label (orange label).
• The label is double because this car seat is type
approved for two types of installation in vehicles:
• With static or inertia-reel three-point seatbelts (the term
UNIVERSAL indicates compatibility of the car seat with
vehicles fitted with this type of seatbelt);
20