Product Description; Installation And Commissioning; Deactivating The Pin Code For The Sim Card; Inserting The Sim Card In The Receiver - SOMFY SO 1841210 Manuel D'installation Et D'utilisation

GSM Receiver

ProduCt dEsCriPtioN

The GSM receiver is used to control an automated device using a mobile telephone.
It can memorise up to 99 mobile telephone numbers.
It is compatible with all GSM operators (apart from Vodafone UK).
Composition of the kit (fig. 1)
No. description
1 GSM receiver
2 Sealing strip
3 Receiver cover bolt
4 Cable clamp - Not used
5 Labels - Not used

iNstallatioN aNd CommissioNiNG

1. deactivating the PiN code for the sim card

Put the SIM card in a mobile telephone to deactivate the PIN code in the card.
2. inserting the sim card in the receiver (fig. 2)
Operation to be carried out with the power off.
Pull out the switch SW1 to switch the power to the receiver off. Refit the switch SW1 once the SIM card has been inserted in the receiver.
3. Wiring the receiver (fig. 3)
terminals Connection
1 - 2 24 V power supply~ ---
8 - 3 OUT 2 NC contact (max. 24V --- 1A)
8 - 4 OUT 2 NC contact (max. 24V --- 1A)
5 - 6 OUT 1 NC contact (max. 120V ~ / 24V --- 1A)
7 <IN> input
4. memorising a telephone in the receiver memory (fig. 4)
Send the following SMS from the telephone to be memorised to the SIM card number:
#PWdpassword#Whlposition in the memory=telephone number
Password Position in the receiver
123456 by default memory (01 to 99)
The telephone number must be entered without a country code.

5. Checking the quality of the Gsm signal

#PWdpassword#CsQ?
Password
123456 by default
• Excellent signal =31
• Good signal =16
• Low signal =12
• Very low signal <12. Find a new location to place the card or switch to another telephone operator offering a better signal in the zone in question.
• If there is no response SMS, the zone is probably not covered by the telephone operator's GSM signal. Change to another operator covering this zone.
6. mounting the receiver onto the wall (fig. 5)
7. activating the contact 1 output (fig. 6)
Call the SIM card number from a telephone stored in the receiver memory. The call with be automatically rejected (therefore no flowrate). The card activates the
OUT1 output.
2
No.
6
7
8
9
Comments
Wire to 24V power supply for the motorisation
Not used
Not used
Wire to dry contact input for the motorisation.
Not used
Number of the telephone
to be memorised
Example of SMS to be sent:
#PWd123456#CsQ?
description
Receiver cover unlocking key
Bracket for securing the receiver
Bracket screw
Cable clamp bolt - Not used
Example of SMS to be sent: #PWd123456#Whl02=987654321
In this example, the telephone number 987654321 must be memorised
in position 2 in the receiver memory.
Example of SMS received:
CsQ=<23>
Copyright © 2014 Somfy SAS. All rights reserved