Pelgrim IDK785ONY Mode D'emploi page 35

OPERATION
Switching on the egg timer
The hob is switched on.
• Touch the - button and the + button for the cooking timer and the
egg timer once at the same time. '00.' is shown in the display and
the red light to the right under the display flashes.
• Use the - button or the + button to set the desired time. The egg
timer starts running when the dot next to the set time disappears.
The red light continues to flash. If you do not set a time with the -
and the + button, the egg timer will automatically switch off after
10 seconds.
Switching off the egg timer
(Step 1 and 2 are not applicable if one or more cooking zones are
active).
1. Touch the On/Off button to switch the hob on.
2. Touch the - button and the + button for the cooking timer/egg timer
at the same time. The dot next to the set time illuminates.
3. Touch and hold the - button for the cooking timer/egg timer until
'01.' shows in the display. Touch the - button again. The cooking
timer/egg timer is now in stand-by mode. The cooking timer/egg
timer automatically switches off after 10 seconds.
Assigning and switching on the cooking timer
The hob is switched on. The cooking timer can only be linked to active
cooking zones.
1. Touch the - and the + button for the cooking timer/egg timer twice
at the same time to set the timer for the first active cooking zone (in
this example, the cooking timer for the rear left zone is active).
Every time the - and the + buttons are touched again at the same
time, you will move to the cooking timer to the next active zone,
which you can set and view.
2. Use the - or the + buttons to set the desired cooking time.
The cooking timer starts running when the dot next to the set
time disappears. The red light for the cooking timer for the active
cooking zone continues to flash.
If you do not use the - and the + buttons to set a time, the cooking
timer will automatically switch off after 10 seconds.
3. Repeat steps 1 and 2 to set the time for another active cooking
zone.
EN 15