Güde Big Wheeler 1601 E Traduction Du Mode D'emploi D'origine page 26

26
The appliance can only be operated by persons over 18
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance requires only appropriate instruction
by a professional or reading the Operating Instructions. No
special training necessary.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services part. Please help us be able to assist you. To be
able to identify your appliance when claimed, we need to
know its serial No., order No. and year of production. All
these details can be found on the type label. Enter the
details below for future reference.
Serial No.
Order No.
Year of production:
Tel.:
Fax:
E-Mail:
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Servicing
Rotating knife
Perform any work/adjusting on the appliance only when
the engine is switched off, appliance unplugged and the
cutting knife idle.
Servicing works not explicitly specified in these Operating
Instructions must only be provided by an authorised staff
as there may be dangerous situations that the operator is
unable to handle. Spare parts may only be replaced by
authorised staff.
Cleaning
Every time the mower was used, clean it using a hand-
brush.
Do not spray water on the mower in any case.
Winterising
Clean the mower properly.
Store the mower in a dry room.
Knife replacement
Rotating knife
Perform any work/adjusting on the appliance only when
the engine is switched off, appliance unplugged and the
cutting knife idle.
Wear protective gloves when replacing the knife.
+49 (0) 79 04 / 700-360
+49 (0) 79 04 / 700-51999
support@ts.guede.com
Use the supplied wrench to release the bolt on the knife.
The cutting knife may now be removed.
Troubleshooting
The table shows possible failures, their possible causes
and removal options. However, if you are unable to
remove the problem, contact a professional to assist you.
Switch the appliance off and unplug it before
servicing and cleaning.
Risk of electric shock.
Symptom Possible cause
No system voltage
Defective On/Off
button
Defective engine
Engine not
starting
Grass is too high
Worn-out carbon
brushes
Obstruction by
Engine failing
foreign items
Grass is too low
Blunt knife
Unsatisfactory
cutting result;
Obstructed knife
engine running
area
heavy
Knife fitted
inappropriately
Obstructed knife
Cutting knife
not rotating Bolt on the knife is
loose
Abnormal Bolt on the knife is
sound, loose
clattering or
unusually Damaged knife
strong
vibrations
Removal
Check the outlet,
cable, conductor,
plug and have them
repaired by an
electrician if
necessary
Repair by an
electrician
Repair by an
electrician
Increase the cutting
height by pressing
the sliding handle
down and lift slightly
the front wheels
Replacement by an
electrician
Remove the foreign
items
Lower the cutting
height
Have the knife
sharpened or replace
it
Remove the
obstruction
Fit the knife properly
Remove the grass
Tighten the bolt on
the knife
Tighten the bolt on
the knife
Have the knife
replaced