Publicité
Les langues disponibles
Les langues disponibles
24
Use protective gloves
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Any defective and/or disposed
electric or electronic
appliances must be delivered
to appropriate collection
centres.
Package:
Protect against moisture
Interseroh-Recycling
Technical specifications:
Connection
Engine speed
Grass catcher capacity
Noise
Training
Please read carefully the Operating Instructions and the
servicing instructions. Familiarise thoroughly with the
controls and proper using of the appliance. You must know
how the appliance works and how the controls may quickly
be switched off.
Use safety shoes
Packing cardboard material
may be delivered to
collection centres for
recycling.
This side up
Engine power
Cutting width
Weight
Never let children work with the appliance. Never let an
adult person work with the appliance without proper
training.
Do not let any persons, especially small children and pets,
to the place of your work.
Be careful to prevent slipping of falling.
If the product is to be used by children
below the age of 8 or persons with
reduced physical, sensory or mental
skills or with a lack of experience and
knowledge, they must be supervised or
instructed in the safe use of the
appliance and understand the resulting
risks. Children must not play with the
appliance. Cleaning and user
maintenance must not be performed
by children without supervision.
Use as designated
The BIG WHEELER 1601 E MOWER has been designed
to treat grass plots and lawns in private spaces.
Works other than those for which the appliance has been
designed and that are specified in the Operating
Instructions cannot be performed with this appliance.
Any other use is in conflict with the designation. The
manufacturer will not be liable for any consequential
damage and injuries. Please be sure to know that our
appliances have not been designed to be used for
industrial purposes.
Assembly
Fastening the handles
1.
Insert the two posts in appropriate holes on the
mower and fasten them using two bolts (included
in the supply).
2.
Shift the cable pull relief equipment above the
arch handle and fasten it using the holding
clamps (included in the supply).
3.
Now fasten the arch handle to the bottom posts
using bolts and fly nuts (included in the supply).
4.
Fasten the 2-point safety switch cable to the
arch handle and the post using two cable
clamps.
Grass catcher assembly
1.
Assemble the grass catcher as shown in the
picture.
Operation
Rotating knife
Perform any work/adjusting on the appliance only when
the engine is switched off, appliance unplugged and the
cutting knife idle.
Operation in general
Grass catcher fitting
Publicité
