Restoring The Factory Settings - M-Audio OXYGEN61 Manuel D'utilisation

The following example assigns a manufacturer specific NRPN coarse (134) message to a control on your Oxygen 61
keyboard:
Key
Control Assign
Data 1 (example)
Data 2 (example)
Data 3 (example)
1. Press the Edit button.
2. Press the Select button or Control Select (Ctrl Sel) key.
3. Select a knob, fader, wheel, button or the sustain pedal as described earlier in this guide.
4. Press the Control Assign (Ctrl Asgn) key.
5. Enter 134 (NRPN Coarse) using the number keys
6. Press the Data 1 key.
7. Enter 6 using the number keys (or the MIDI CC).
8. Press the Data 2 key.
9. Enter the value to be transmitted via MIDI CC 98 (LSB) using the number keys.
10. Press the Data 3 key.
11. Enter the value to be transmitted via MIDI CC 99 (MSB) using the number keys.
12. Press the Enter key.

Restoring the Factory Settings

Factory default settings can be restored by holding down the - and + buttons during power-up. At this point all
previously saved data will be erased.
Parameter
NRPN Coarse
CC for Value Change
CC 98 / LSB
CC 99 / MSB
16
Value
134
6
51
3