Zipper Maschinen ZI-BTM 130 Mode D'emploi page 30

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
OPERATION
Filling:
Before filling the drum, ensure that the opening
is aligned in such a way that the mixture cannot
fall out of the drum.
Put the mixture in when the drum is rotating
(do not overfill the drum!)
Mixing:
Adjust the drum a little bit lower.
Thus a good mixing result is achieved
Emptying:
Swivel the drum in the downward direction to
empty it.
Ensure that there is an adequate container
under the drum (e.g., wheelbarrow).
Ensure that no mixture falls on the ground
ATTENTION!
The full drum is heavy!
Storage and breaks:
Adjust the drum in the downward direction
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
30
ZI-BTM130

Publicité

Table des Matières
loading

Table des Matières