Security Instructions - Zipper Maschinen ZI-BTM 130 Mode D'emploi

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BTM130

 Make sure the work area is lighted sufficiently
 Do not overload the machine
 Provide good stability and keep balance all times
 Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired,
as well as under the influence of alcohol, drugs or concentration
influencing medicaments is forbidden.
 Respectively trained people only and only one person shall operate
the machine.
 Do not allow other people, particularly children, to touch the machine
or the cable. Keep them away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The
minimum safety distance is 2m

 Use personal safety equipment: safety goggles, safety shoes S1, work
wear, safety gloves (EN 388, class 3111) when working with or on the
machine.
 Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine
stops.
 Always disconnect the machine prior to any actions performed at the
machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch

 The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable
for outdoor use
 Protect the cable from heat, oil and sharp edges

Avoid body contact with earthed
SAFETY
27