Pioneer BDP-440 Mode D'emploi page 45

BDP-140_UCXCNSM_IBD_EN.book Page 45 Tuesday, July 19, 2011 10:54 AM
 Changing to other language at
language setting
1 Select and set Language.
Use / to select, then press ENTER.
2 Select and set OSD, Audio, Subtitle or Menu
Use / to select, then press ENTER.
3 Select and set the desired language.
Use / to select, then press ENTER.
4 Change the language.
Use / to change, then press ENTER.
• The language can also be changed using the number
buttons. Use / to move the cursor to Number,
use the number buttons (0 to 9) to input the number,
then press ENTER. Refer to page 48.
Note
• If a language not recorded on the BD/DVD is set, one
of the recorded languages is automatically selected
and played.
 Erasing data that has been added to
BDs and application data
Use this procedure to erase data that has been added to
BDs (data downloaded with the BD-LIVE function and
data used with the BONUSVIEW function) and
application data.
Caution
• Some time is required to erase the data.
• Do not unplug the power cord while data is being
erased.
• This operation does not work when a disc is loaded.
Select and set BUDA  BUDA Setup.
1
Use / to select, then press ENTER.
2 Select and set the erase menu.
Use / to select, then press ENTER.
3 Select Yes, then press ENTER.
Use /// to select, then press ENTER.
 Registering or Changing the
password
Use this procedure to register or change the code
number required for the Parental Lock settings.
Select and set Security  Change Password 
1
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Re-input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
• To change the password, input the previously
registered password, then input the new password.
Note
• We recommend making a note of the password.
• If you have forgotten the password, reset the player to
the factory default setting, then register the password
again (page 47).
 Changing the Parental Lock level for
viewing DVDs/BD-ROMs
Some DVD-Video discs containing scenes of violence, for
example, have Parental Lock levels (check the indications
on the disc's jacket or elsewhere). To restrict viewing
these discs, set the player's level to the level lower than
the discs.
Select and set Security  Parental Control 
1
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Change the level.
Use / to change, then press ENTER to set.
Note
• The level can be set to Off or between Level1 and
Level8. When set to Off, viewing is not restricted.
 Changing the Country/Area code
Select and set Security  Country Code  More.
1
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3 Change the country/area code.
Use / to change, then press ENTER to set.
07
45
En